This must cover, at a minimum, the power of each and every one of the components, being the CPU and the GPU the components that consume the most.
While it is true that the motherboard is also important, taking into account that in the market there are 4 main manufacturers that cover all people (ASUS, GigabyteMSI and ASRock), any motherboard we buy should not present any problems unless it has a factory defect.
The second component to which we must pay special attention is the thermal paste that we are going to use between the heatsink and the IHS of the processor. The thermal paste is responsible for dissipating the heat generated by the processor during its operation through the heatsink.
As it is an economical product, we can find a large number of thermal paste manufacturers on the market, however, not all of them offer the same benefits.
Find out if a thermal paste is quality
Finding out if a thermal paste is good or bad is a very simple process and it is not always necessary to buy it to clear up doubts.
- electrical conductivity. The main mission of thermal paste is not to conduct electricity but rather heat, so we must avoid thermal pastes that include high electrical conductivity, since it can cause short circuits on the motherboard if we do not place it correctly, it is very viscous or We put more than necessary.
- Goo. The thermal paste is designed to be distributed evenly across the IHS in a simple way to color the heatsink. If the paste is too liquid, we will end up filling the edges of the IHS with thermal paste, which can be a problem if it also includes elements that conduct electricity since it can cause a short circuit on the board.
- Check specifications. A quality thermal paste should offer a conductivity equal to or greater than 4 W/mk. This information is shown in the product specifications, so it is not necessary to purchase it to clear up doubts. If this information is not displayed, we can discard that product.
- Use temperature. A processor, like a graphics card, without an adequate cooling system, can easily exceed 100ºC. When buying a thermal paste, it is important to read the details of it and that, at a minimum, it offers support up to 150º C.
Best thermal paste manufacturers
As we have mentioned above, in the market we can find a large number of thermal paste manufacturers since their price is very low. But, if we do not want to waste time looking for manufacturers, we can trust without any problems in arctic, Noctua, corsair and Thermal Grizzly.
If we look for thermal paste from these manufacturers on Amazon, we can see how they have a very good rating with a large number of reviews, which, without a doubt, is synonymous with being a quality thermal paste.
